1-10. EQUIPMENT PURPOSE, CAPABILITIES, AND FEATURES-continued.
Determination of Fuel System Icing Inhibitor in Hydrocarbon Fuels
The Airmobile Laboratory incorporates the following features:
Fully air and ground transportable for rapid deployment
Rigid wall construction
All weather operation
Rapid set-up for use
Self-contained environmental control system
Self-contained water system
Self-contained air-vacuum system
Skid mounted for short distance towing
Designed to operate under blackout. conditions with door activated blackout switches
1-11. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS.
The Air mobile laboratory entrance door end is the rear of the
laboratory Laboratory exterior sides and interior walls are designed
roadside (left) and curbside (right) as viewed from the entrance
a. Rear and Curbside Exterior.
Laboratory Tiedown Rings. Eight tiedown rings provide a means of securing laboratory
to prevent movement during transportation.
Laboratory Entrance Door.
Provides entrance into laboratory, and an exit out of
Laboratory Secondary Exit. Provides exit from laboratory in the event that the entrance
door becomes blocked.
Laboratory Electrical Connector Receptacle. Houses main power cable connector and
ground cable lug. Protected by cap.
Recessed Step Assembly. Provides a means of reaching top of laboratory.