REMOVE/INSTALL EYEWASH STATION.
This task covers:
General Mechanics Tool Kit, Appendix B, Item 1,
Teflon Tape, Appendix E, Item 46,
Remove eyewash station. See figure 4-29
Shut down the water pump.
Remove eyewash valve from hose.
Remove eyewash valve from sink.
Remove teflon tape from eyewash valve.
Install the eyewash station. See figure 4-29.
Apply teflon tape to male fitting. Be sure to wrap teflon tape in same direction of pipe
Install eyewash valve to hose.
Start the water pump and check for leaks and verify proper operation.