TM 1-1680-359-10
2-7. OPERATING PROCEDURE (Cont)
the can and press down with heel of your hand, using the ring as a lever to break the seal.
WARNING
Be careful using the illumination signal. Drippings from the burning signal can cause serious
burns on the body.
CAUTION
When pulling on the pull ring, do not use a twisting motion as the pull tab may tear off and
signal may not ignite.
(d)
Make a steady, straight horizontal pull until the pull ring and tab separate from the signal.
Continue pulling upwards until a full arm's length is reached and point the activated signal end
upward at a 45 degree angle until the signal has burned out.
NOTE
Do not discard a smoke and illumination signal until both ends have been used.
2-47