ENGINE CLEARING (CONT)
Do not exceed starter limitation of 40 seconds on
and 60 seconds off for two starting attempts and
engine clearing procedure. Allow 30 minutes off
before additional starter operation.
3. IGNITION AND ENGINE START
switch - STARTER ONLY (15 sec-
onds minimum, 40 seconds maxi-
4. IGNITION AND ENGINE START
switch - OFF.
FIRST ENGINE START (CPU START)
1. Propeller area - Clear.
2. IGNITION AND ENGINE START
switch - ON. IGN ON light illumi-
nated and associated FUEL PRESS
If ignition does not occur within 10 seconds after
moving the CONDITION lever to LOW IDLE,
initiate ENGINE CLEARING procedure. If for
any reason the starting attempt is discontinued, the
entire starting sequence must be repeated after
allowing the engine to come to a complete stop (1
3. CONDITION lever (after N1 stabilizes
at or above 12% for 5 seconds) - LOW