TM 1-1510-225-10
3A-79
4. Line select key Press to position
cursor
over
the
desired
TRANSITION.
5. ENTER key Press to select
TRANSITION.
NOTE
Cursor will move to the STAR field.
6. Line select key Press to position
cursor over the desired STAR.
7. ENTER key Press to select
STAR.
NOTE
If the STAR and TRANSITION are runway
dependent, and a runway has not pre-filled,
the cursor will move to the RUNWAY field
and the message RUNWAY REQUIRED will
appear.
8. Line select key Press to position
cursor over the desired RUNWAY.
9. ENTER key Press to select
RUNWAY.
10. STAR waypoints Review, then
press ENTER key to insert STAR
into active flight plan and return to
the Active Flight Plan page.
NOTE
STAR waypoints appear indented from the
other waypoints on a flight plan.
(h) Reviewing a STAR.
1. Line select key Press to position
cursor over the ARRIVE field on
the Flight Plan page.
2. ENTER key Press to review
STAR.
3. BACK key Press to return to
Flight Plan page.
NOTE
SELECT will not appear as an option since
a STAR already exists in the flight plan.
(i) Editing a STAR.
1. Line select key Press to position
cursor over the ARRIVE field on
the Flight Plan page.
2. ENTER key Press.
3. Line select key Press to position
cursor over the STAR field.
4. BACK key Press to display a list
of alternate STAR's.
NOTE
A list will only appear if the transition is
compatible with other STAR's.
5. Line select key Press to position
cursor over the desired STAR.
6. ENTER key Press to select
desired STAR.
NOTE
Cursor will move to SELECT? field.
7. ENTER key Press to insert new
STAR:x. into the flight plan.
NOTE
The TRANSITION or RUNWAY can also be
edited without changing the original STAR
by
positioning
the
cursor
over
the
appropriate field and following the above
procedure.
(j) Erasing a STAR.
1. Line select key Press to position
cursor over ARRIVE field on the
Flight Plan page.
2. ENTER key Press.
3. Line select key Press to position
cursor over ERASE?.
4. ENTER key Press to erase
STAR and return to Flight Plan
page.
(k) Adding a STAR Waypoint.
NOTE
When a STAR is modified by adding or
deleting
waypoints,
the
sequence
of
waypoints is no longer identified as a
STAR.